PVC polyvinyl chloride and LSZH halogen-free low-smoke
Description
Features
1.1 Rated voltage: main control wire core 300/500V; wire pair unit 300/300V.
1.2 Operating temperature: the ambient temperature is 0~40°C; the maximum operating temperature of the conductor does not exceed 70°C.
1.3 The highest elevator speed: TVVB/WDZ-TYYB type does not exceed 1.6m/s; TVVBG/ WDZ-TYYBG type does not exceed 3.5m/s; THVVBG/WDZ-THYYBG type does not exceed 6.3m/s.
1.4 Suspension length: The free suspension length of the accompanying cable installation does not exceed 35m for TVVB/WDZ-TYYB type, 80m for TVVBG/WDZ-TVVBG type, and 150m for THVVBG/WDZ-THYYBG type.
1.5 Bending radius:
- The fixed laying part should not be less than 5 times the actual short diameter H (short side dimension) of the cable
; both sides shall be parallel).
1.6 Installation of cables:
If there is no tension element, the cable should be clamped and installed with a fixed clip. If there is a tension element, the tension element should be pulled out first and installed with a special sling.
1.7 Service life: 3 million times.
display method
Features
3.1 Main control wire core
3.1.1 Conductor type: Conform to the fifth type bare copper round flexible conductor in GB/T 3956-2008/IEC 60228:2004 and JB/T 8734.6-2016 . 3.1.2 Insulation requirements: TVVB/TVVBG/THVVBG complies with the PVC/D type 70℃ insulation material in GB/T 5023.1-2008/IEC 60227-1:2007. WDZ-series should comply with WDZ-Y-J70 insulation material in GB/T 32129-2015. 3.1.3 Structure parameters:
|
Specification |
Insulation nominal thickness mm |
Maximum Conductor DC Resistance Ω/km at 20 °C |
Minimum insulation resistance at the highest operating temperature of the conductor MΩ·km |
|
0.5 |
0.4 |
39.0 |
0.012 |
|
0.75 |
0.4 |
26.0 |
0.011 |
|
1 |
0.5 |
19.5 |
0.010 |
|
1.5 |
0.7 |
13.3 |
0.010 |
|
2 |
0.4 |
9.79 |
0.0090 |
|
2.5 |
0.8 |
7.98 |
0.009 |
3.2 External protection requirements: TVVB/TVVBG/THVVBG conforms to the PVC/ST5 type 70℃ gray material in GB/T 5023.1-2008/IEC 60227-1:2007.
WDZ-series should comply with WDZ-Y-H70 black material in GB/T 32129-2015.
3.3 Line pair unit (optional)
2×0.75 twisted pair; 2P×0.75 copper shielded twisted pair; 2P3×0.75 aluminum-plastic shielded twisted pair. It is recommended to use a length of no more than 100 meters. If the length exceeds this length, it is recommended to consult a network engineer , such as adding receiving and sending signal repeaters (amplifiers) at both ends of the cable.
3.4 Coaxial unit (optional)
75Ω coaxial RF cable, it is recommended to use a length of no more than 100 meters. If the length exceeds this length, it is recommended to consult a network engineer, such as adding a signal repeater (amplifier) for receiving and sending at both ends of the cable.
1-stranded inner conductor; 2-insulation; 3-braided outer conductor; 4-sheath
3.5 Network cable unit (optional)
UTP-5e, SFTP-5e, UTP-6, SFTP-6, SF/FTP-7, the length of the network cable is recommended to be no more than 90 meters. The terminal increases the signal repeater (amplifier) for receiving and sending.
3.6 Optical cable unit (optional)
G9/125 single-mode, G50/125 multi-mode, G62.5/125 multi-mode.
3.7 The tension element (optional according to the free suspension length)
is symmetrically distributed with 2 tension steel wire ropes on the left and right sides.
partial structure
Contact Us
Electrical control：+86-400-820-7921 Variable frequency drive：+86-400-821-0325 Robot ：+86-400-920-0275 Motion control：+86-021-3102 6318 Intelligent manufacturing：+86-021-6992 6005 E-mail：info@xinshida.com Address: No.599 Meiyu Road, Jiading District, Shanghai, 201802, China-
Business
-
Service
-
About
Swipe to follow STEP
STEP Service Number
STEP Subscription Number
©️ 2022 Shanghai STEP Electric Corporation ICP10024532-10